Reading Camlp4, part 5: filters

Hey, long time no see!

It is high time to get back to Camlp4, so I would like to pick up the thread by covering Camlp4 filters. We have previously considered the parsing and pretty-printing facilities of Camlp4 separately. But of course the most common way to use Camlp4 is as a front-end to ocamlc, where it processes files by parsing them into an AST and pretty-printing them back to text (well, not quite—we will see below how the AST is passed to ocamlc). In between we can insert filters to transform the AST.

So let’s dive into an example: a filter for type definitions that generates t_to_string and t_of_string functions for a type t, a little like Haskell’s deriving Show, Read. To keep it simple we handle only variant types, and only those where all the arms have no data. Here goes:

moduleMake(AstFilters:Camlp4.Sig.AstFilters)=structopenAstFilters

In order to hook into Camlp4’s plugin mechanism we define the filter as a functor. By opening AstFilters we get an Ast module in scope. Unfortunately this is not the same Ast we got previously from Camlp4.PreCast (although it has the same signature) so all our code that uses Ast (including all OCaml syntax quotations) needs to go inside the functor body.

letrecfiltersi=matchwrap_str_itemsiwith|<:str_item<type$lid:tid$=$Ast.TySum(_,ors)$>>->begintryletcons=List.map(function|<:ctyp<$uid:c$>>->c|_->raiseExit)(Ast.list_of_ctypors[])into_of_stringsitidconswithExit->siend|_->si

The filter function filters Ast.str_items. (It is not actually recursive but we say let rec so we can define helper functions afterward). If a str_item has the right form we transform it by calling to_of_string, otherwise we return it unchanged. We match a sum type definition, then extract the constructor names (provided that they have no data) into a string list. (Recall that a TySum contains arms separated by TyOr; the call to list_of_ctyp converts that to a list of arms.)

andwrap_str_itemsi=let_loc=Ast.loc_of_str_itemsiin<:str_item<$si$>>

For some reason, <:str_item< $si$ >> wraps an extra StSem / StNil around si, so in order to use the quotation syntax on the left-hand side of a pattern match we need to do the same wrapping.

andto_of_stringsitidcons=let_loc=Ast.loc_of_str_itemsiin<:str_item<$si$;;$to_string_loctidcons$;;$of_string_loctidcons$;;>>

This str_item replaces the original one in the output, so we include the original one in additional to new ones containing the t_to_string and t_of_string functions.

andto_string_loctidcons=<:str_item<let$lid:tid^"_to_string"$=function$list:List.map(func-><:match_case<$uid:c$->$`str:c$>>)cons$>>

To convert a variant to a string, we match over its constructors and return the corresponding string.

andof_string_loctidcons=<:str_item<let$lid:tid^"_of_string"$=function$list:List.map(func-><:match_case<$tup:<:patt<$`str:c$>>$->$uid:c$>>)cons$|_->invalid_arg"bad string">>

To convert a string to a variant, we match over the corresponding string for each constructor and return the constructor; we also need a catchall for strings that match no constructor. (What is this tup and patt business? A contrived bug which we will fix below.)

;;AstFilters.register_str_item_filterbeginfunsi->let_loc=Ast.loc_of_str_itemsiin<:str_item<$list:List.mapfilter(Ast.list_of_str_itemsi[])$>>end

Now we register our filter function with Camlp4. The input str_item may contain many str_itemss separated by StSem, so we call list_of_str_item to get a list of individuals.

endmoduleId=structletname="to_of_string"letversion="0.1"end;;letmoduleM=Camlp4.Register.AstFilter(Id)(Make)in()

Finally we register the plugin with Camlp4. The functor application is just for its side effect, so the plugin is registered when its .cmo is loaded. We can compile the plugin with

ocamlfind ocamlc -package camlp4.quotations.o -syntax camlp4o \ 
  -c to_of_string.ml

and run it on a file (containing type t = Foo | Bar | Baz or something) with

camlp4o to_of_string.cmo test.ml

Looks pretty good, right? But something goes wrong when we try to use our plugin as a frontend for ocamlc:

ocamlc -pp 'camlp4o ./to_of_string.cmo'test.ml

We get a preprocessor error, “singleton tuple pattern”. It turns out that Camlp4 passes the processed AST to ocamlc not by pretty-printing it to text, but by converting it to the AST type that ocamlc uses and marshalling it. This saves the time of reparsing it, and also passes along correct file locations (compare to cpp’s #line directives). However, as we have seen, the Camlp4 AST is pretty loose. When converting to an ocamlc AST, Camlp4 does some validity checks on the tree. What can be confusing is that an AST that fails these checks may look fine when pretty-printed.

Here the culprit is the line

$tup:<:patt<$`str:c$>>$->$uid:c$

which produces an invalid pattern consisting of a one-item tuple. When pretty-printed, though, the tup just turns into an extra set of parentheses, which ocamlc doesn’t mind. What we wanted was

$`str:c$->$uid:c$

This is a contrived example, but this kind of error is easy to make, and can be hard to debug, because looking at the pretty-printed output doesn’t tell you what’s wrong. One tactic is to run your code in the toplevel, which will print the constructors of the AST as usual. Another is to use a filter that comes with Camlp4 to “lift” the AST—that is, to generate the AST representing the original AST! Maybe it is easier to try it than to explain it:

camlp4o to_of_string.cmo -filter Camlp4AstLifter test.ml

Now compare the result to the tree you get back from Camlp4’s parser for the code you meant to write, and you can probably spot your mistake.

(If you tried to redirect the camlp4o command to a file or pipe it through less you got some line noise—this is the marshalled ocamlc AST. By default Camlp4 checks whether its output is a TTY; if so it calls the pretty-printer, if not the ocamlc AST marshaller. To override this use the -printer o option, or -printer r for revised syntax.)

This Camlp4AstLifter is pretty useful. What else comes with Camlp4? There are several other filters in camlp4/Camlp4Filters which you can call with -filter:

• Camlp4FoldGenerator generates visitor classes from datatypes. Try putting class x = Camlp4MapGenerator.generated after a type definition. The idea is that you can override methods of the visitor so you can do some transformation on a tree without having to write the boilerplate to walk the parts you don’t care about. In fact, this filter is used as part of the Camlp4 bootstrap to generate vistors for the AST; you can see the map and fold classes in camlp4/Camlp4/Sig.ml.

• Camlp4MetaGenerator generates lifting functions from a type definition—these functions are what Camlp4AstLifter uses to lift the AST, and it’s also how quotations are implemented. I’m planning to cover how to implement quotations / antiquotations (for a different language) in a future post, and Camlp4MetaGenerator will be crucial.

• Camlp4LocationStripper replaces all the locations in an AST with Loc.ghost. I don’t know what this is for, but it might be useful if you wanted to compare two ASTs and be insensitive to their locations.

• Camlp4Profiler inserts profiling code, in the form of function call counts. I haven’t tried it, and I’m not sure when you would want it in preference to gprof.

• Camlp4TrashRemover just filters out a module called Camlp4Trash. Such a module may be found in camlp4/Camlp4/Struct/Camlp4Ast.mlast; I think the idea is that the module is there in order to generate some stuff, but the module itself is not needed.

• Camlp4MapGenerator has been subsumed by Camlp4FoldGenerator.

• Camlp4ExceptionTracer seems to be a special-purpose tool to help debug Camlp4.

OK, maybe not too much useful stuff here, but it is interesting to work out how Camlp4 is bootstrapped.

I think next time I will get into Camlp4’s extensible parsers, on the way toward syntax extensions.

I wrote my previous posts in raw HTML, with highlighted code generated from a hightlighted Emacs buffer by htmlize.el. Iterating on this setup was unutterably painful. This post was written using jekyll with a simple template to approximate the Blogspot formatting, mostly so I can check that lines of code aren’t too long. Jekyll is very nice: you can write text with Markdown, and highlight code with Pygments.